Glisteny On Off Switch Led Strip Switch 5-24V DC Inline Switch 23mm Touch Control Dim Switch Male/Famale Connector Led Light Strip Led Rigid bar Led Tape Light
Super Savings Item! Save 34% on the Glisteny On Off Switch Led Strip Switch 5-24V DC Inline Switch 23mm Touch Control Dim Switch Male/Famale Connector Led Light Strip Led Rigid bar Led Tape Light by Glisteny at GC Lib. MPN: Glistenyviceiryeus103. Hurry! Limited time offer. Offer valid only while supplies last. Technology Features: Replacing mechanical switch, Artistic facade,Easy operation. Instruction: 1.In the case of outage,connect the power source
Replacing mechanical switch, Artistic facade,Easy operation.
1.In the case of outage,connect the power source
inductor and LED light according to the sketch map.
2.Power-on, Blue indicator light on;short press,
inductor controls On/Off of LED light;long press,
inductor controls LED light-dimmer.
1.Operating Voltage: 5-24V DC;
2.Load Current: 3A;
short press, On/Off function;long press, light-dimmer function;
5.Connecting Wire Length;
Male female head wire are 20cm respectively
DC2.1*5.5 Female head wire(Input wire), connect the power transformer;
DC2.1*5.5 Male head wire(Output wire), connect the LED Light;
1x Touching Type Sensor Detector Switch
1. installation shall live wiring, non-load short-circuit, to be installed and then electricity.
2. Do not touch the metal below switch position, there will be static electricity, switch interference effect.
3. in strict accordance with the wiring schematic docking, once the wrong cause damage to the sensor, resulting in power line fault.
4. A non-super-power range, otherwise it will damage the sensor.
Features & Highlights
- 【Size】switch diameter 23mm. The clearance hole diameter should be slightly larger than 0.75" or 3/4".
- 【Work】Power on, the blue indicator light.Short press, the sensor control LED lights on and off. Long press, sensor control LED brightness gradually dimming.
- 【Operating voltage】5-24V DC (No power supply)Make sure that you are connected to a working voltage of 5-24V.
- 【Use】Connect the power supply inductor and the LED lamp according to the diagram.It is strictly forbidden to use ultra-power range, otherwise it will damage the sensor.
- 【Note】The main part of the touch switch is a high-grade plastic material. Metal will be conductive, not suitable for touch switch materials.Do not touch the metal below the switch (hexagonal metal) and it will conduct electricity. It is only used to fix the switch inside the hole in the accessories.
|Manufacturer:||Glisteny Co., Ltd|
|Publisher:||Glisteny Co., Ltd|
|Studio:||Glisteny Co., Ltd|
|Item Weight:||0.02 pounds|
|Item Size:||3.94 x 3.94 x 3.94 inches|
|Package Weight:||0.04 pounds|
|Package Size:||2.7 x 0.7 x 0.7 inches|